Air signal detection system
It can: scan, detect and inspect aerial radio signals; investigate, find the direction and locate aerial radio interference signals; detect the coverage of 4G, 5G and other signals; and conduct real-time environmental inspections and monitoring of drone routes.
check the details
WSA408 RF Signal Analyzer
This is a complete portable instrument with built-in battery, display touch screen (10.1 inches) and single-board computer; it weighs 3.5Kg and measures 34X24X7cm, making it suitable for field and mobile operations.
check the details
WSA308 spectrum analyzer test head
This is a radio frequency instrument designed for use in indoor environments such as laboratories. When used with an external PC, it can achieve the same functions as the WSA408. It can also be installed outdoors and remotely operated through the network.
check the details
WSA308B spectrum signal direction finding analysis system
The system can be used for base station spectrum patrol and monitoring, interference troubleshooting and positioning, spectrum resource optimization and detection, etc.
check the details
WSA208 RF Signal Analysis Module
This is a RF signal analyzer module, which is characterized by its small weight (380g) and powerful functions. It can be flexibly applied to various specially designed fixed or mobile special function systems. It can also be integrated with directional antennas, electronic compasses, etc. and installed on drones or vehicles to become a mobile wireless signal monitoring system in the air, on the ground, or on the water.
check the details
CWUS-300/400 Inspection/Testing Instrument
This is a detection/testing instrument based on low voltage continuous broadband pulse compression technology. It can be used as an ultrasonic non-destructive testing instrument for metals and non-metals, and can also be used as a testing instrument in the manufacturing process of electronic products.
check the details
960B Multi-Channel Test Instrument
- Passively and/or actively detect & measure AUDIO LEVELS and ECHO- Assess voice quality - MOS, DELAY, NOISE, etc.- Qualify Echo Cancellers - Dispersive Echo and programmable delay- Verify FAX/data modem transparency- Verify VAD, Jitter Buffer, Comfort Noise, silence suppression performance- Emulate Fax and True IP phones with jitter buffers and real RTP- Filter, decode and analyze RTP/RTCP- Detect and monitor rogue/...
check the details
966R Multi-Channel Rack Test Server
- Field Certification and Deployment Testing - Voice Quality Testing - Tier III Fault Isolation - Proactive Quality Assurance Testing - Proactive IMT Testing (ROTL)
check the details
930i International Test Set
The 930i is designed for use in a wide variety of applications, including:- VoP, Voice Quality and Troubleshooting- Echo Canceller testing and design verification- Computer/Internet Telephony Testing- Inter-Office Troubleshooting- Qualification Testing at Customer Premises- OEM Testing in Manufacturing/Production- Installed equipment as part of a Test System- Laboratory Standard
check the details
925VST Hand-held VoIP Service Tester
- Fast, comprehensive VoIP qualification - Qualify service in less than a minute! - Next Generation SAGE Voice Suite - Provides clarity merit score (MOS) - Measures/adjusts audio level - Measures background noise
check the details
UCTT Base Station Test Instrument （UCTT8901B）
- 25 MHz Analysis Bandwidth FFT Spectrum Analyzer- BTS Transmitter Performance- BTS Receiver Performance- Antenna Performance- Distance to Fault- T1/E1 BERT Tester- Modulation Analyzer- Complex Wave Generator- Integrated Precision Power Meter- Performs all standard BTS and OTA measurements
check the details
UDLV-NDT 8801
Intended Applications - Defect detection - Thickness meter - Flow meter - Fine Material characterization - Scanning Acoustic Microscopy - Indoor Positioning System - Sonar and engineering radar - High performance medical imaging
check the details
